{"product_id":"4x-sata-hat-for-nanopi-m4","title":"4x SATA HAT for NanoPi M4","description":"\u003cp\u003eThe NanoPi M4 SATA HAT has four SATA ports which support three communication rates: 6 Gbps, 3 Gbps, and 1.5 Gbps. Its 4-Pin power connector includes a 12V and 5V outputs and is able to carry large currents. It has four LEDs for Indicating the status of each SATA port. It has two 12V-power input options: one DC-Jack and one 5566-04A connector. The output current of the 12V to 5V DC\/DC regulator is up to 8A. It has a PowerKey button, a PowerKey jumper and two 4-PIN PH2.0 USB 2.0 host connectors.\u003cbr\u003e \u003cbr data-mce-fragment=\"1\"\u003eIt has two PCB nuts for mounting a heatsink above the PCIe to SATA brigde and one 2-PIN PH2.0 connector for a fan. The 12V output is modulated by PWM1 \u003cbr data-mce-fragment=\"1\"\u003eIt populates all the signals from the NanoPi M4's 40-PIN connector.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eSATA\u003c\/td\u003e\n\u003ctd\u003e \n\u003cul\u003e\n\u003cli\u003eUse Marvell 88SE9215 Four-Port 6 Gbps SATA I\/O Controller\u003c\/li\u003e\n\u003cli\u003eFour Sata Ports. It supports three communication rates:6 Gbps, 3 Gbps, and 1.5 Gbps\u003c\/li\u003e\n\u003cli\u003eOne 4-Pin power connector. It includes a 12V and a 5V outputs and is able to carry large currents Four LEDs for indicating the status of each rata port\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eTwo 12V Power Input options. It includes a 5.5*2.1mm DC-Jack and a 5566-04A connector\u003c\/li\u003e\n\u003cli\u003eThe output current of the 12V to 5V DC\/DC regulator is up to 8A\u003c\/li\u003e\n\u003cli\u003eOne PowerKey button and PowerKey jumper\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUSB\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eTwo 4-PIN PH2.0 USB 2.0 host connectors\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeat dissipation\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eTwo PCB nuts for mounting a heatsink above the PCIe to SATA bridge\u003c\/li\u003e\n\u003cli\u003eOne 2-PIN PH2.0 connector for fan. The 12V output is modulated by PWM1\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGPIO\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eALL the signals of the NanoPi M4's 40-PIN connector are populated\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eDC 12V\/2A\u003c\/li\u003e\n\u003cli\u003e(A 12V\/2A power can drive one 3.5\" hard disk or four 2.5\" hard disks. To drive four 3.5\" hard disks a 12V\/5Apower is needed)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOS Support\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eFriendlyCore 18.04 (64-bit)\u003c\/li\u003e\n\u003cli\u003eFriendlyDesktop 18.04 (64-bit) Lubuntu 16.04 (32-bit)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eKernel version\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eLinux-4.4-LTS\u003c\/li\u003e\n\u003cli\u003eU-boot-2014.10\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBoard Support\u003c\/td\u003e\n\u003ctd\u003eNanoPi iv14\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e33.48g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimension\u003c\/td\u003e\n\u003ctd\u003e65 x 56mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"FriendlyELEC","offers":[{"title":"Default Title","offer_id":41073617666254,"sku":"HAT-for-NanoPi-M4","price":25.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0558\/4974\/6638\/products\/M4SATAHat_02-900x630.jpg?v=1696859094","url":"https:\/\/friendly-arm-tr.myshopify.com\/ja\/products\/4x-sata-hat-for-nanopi-m4","provider":"Antallia","version":"1.0","type":"link"}